ELASGLOW: Single Channel, 4″ x 1″ Black Medium Duty Drop Over, GLOW

$128.00

in stock
SKU: ED1010-BK-GLOW

GLOW – Medium Duty, 4″ x 1″ – Black

Email

Description


 

ELASGLOW Dropover : Single channel that is 4 inches wide by 1 inch tall. Offered in a black color and solves your basic needs in the office or on site.
 

Elasco now offers the most visible glow in the dark cable protectors in the industry. In addition to our high quality urethane protectors, we have incorporated the highest grade of strontium aluminate which requires only 10 seconds of UV exposure to fully charge and will maintain its visibility throughout the night. Requiring no maintenance, batteries or electricity, these glow protectors are ideal for providing additional visibility when needed in dark conditions. .
 

GLOW DISCLAIMER: Glow is measured in milli-candella’s. The human eye, when dark adapted which takes most humans between 15-45 minutes, can see in the dark 3.7 milli-candella’s. Under the correct circumstances of pure darkness, our glow material can be seen up to 40 hours when the human eye has been dark adapted. Ideally, when viewing the glow material, your eyes should be dark adapted which means one has not been in the sun or other light source – this will keep one’s eyes from adapting between dark and light. If your eyes adjust from light to dark or there is light pollution present, the material will not look as enhances until one’s eyes re-adapt.

Additional

Channel

 No.:1  Width: 4.  Height: 1.0

 

Overall

 Length: 36.00  Width: 10.50  Weight: 6.00

 

*Measurement in inches and weight in pounds.

 

Load Bearing capacity – 8,850 lbs per tire

 

 

Product Features

Elasco Products Manufacturers Only Highest Qualty Products.

To offer the most Premium Product possible we do things the Elasco Way!

  • Polyurethane Product – Compared to other materials such as Rubber, Plastics, and Metals, Polyurethane offers the best product characteristics.
    • Polyurethane is not biodegradable, has stronger abrasion and corrosion resistance, higher load bearing capacity, less likely to crack, and has more customization potential in material hardness and color
  • Solid Cast Manufacturing – Offers superior physical properties to injection molding resulting in a stronger product
  • Operating Temperature – Resistant to the fiercest elements withstanding anything from blizzards to heat waves
  • Maintenance – Easily cleaned and abrasion resistant to the elements
  • Fiberglass Rod* – Reinforced fiber glass rod which will never corrode, rust, or break
  • Surface Pattern – Ultimate slip resistant pattern to minimize slips and falls
  • Connectors – Ultra strong connection points with easy & safe configuration
  • Easy Transportation* – Built in handles underneath base for easy transportation
  • Safety Colors* – Standard colors come in black base and orange lid making products easily noticeable by pedestrians and drivers
  • Configuration Options – Various products come with a variety of turns and end sets for easy and safe configuration
  • Compliant – Dully Compliant with NEC, OSHA, REACH, and RoHS

Channel

 No.:1  Width: 4.  Height: 1.0

 

Overall

 Length: 36.00  Width: 10.50  Weight: 6.00

 

*Measurement in inches and weight in pounds.

 

Load Bearing capacity – 8,850 lbs per tire

 

 

The Fine Print

INSTALLATION INSTRUCTIONS

When purchasing your Elasco Cable Guards, be sure to consider all of your project requirements, including the number of channels, the size of the channels, and your load bearing.

  • Step 1: When positioning your Elasco Cable Guards, aim to have traffic approaching the product from the hinge side first.  Avoid irregular surfaces where possible; water and other fluids can collect and create a slipping hazard.
  • Step 2: When connecting the pieces together, always have the female side on top of the male side of the product (see picture to the left).  [Pat: Show close up image of connectors.] Push down on the pieces at the connecting points.
  • Step 3: Now you are ready to flip open the lid and insert your cables into your Elasco Cable Guards.  Start by placing cables in the channel closest to the leading edge.  Be sure to always load the most sensitive cables and hoses closest to the hinge-side of your Elasco Cable Guards.  Do not overstuff the cables; this can cause damage or cause a tripping hazard.  Once the cables are laid out, either tuck the lid under the lip of your Elasco Cable Guard or, if applicable, secure the buttons on the lid to the base of your Elasco Cable Guard.

Lids are durable and unlikely to tear.  However, if your Elasco Cable Guard is damaged, replace the lid immediately to avoid any tripping hazards.

When cleaning your Elasco Cable Guards, simply use ordinary soap and water.

RETURN POLICY

Merchandise may be returned within 30 days of the invoice date without a restocking fee, unless otherwise noted in our Return Policy Exceptions.  The customer is responsible for all shipping charges. All products must be returned in brand new condition.

SHIPPING POLICY

Small Orders: We aim to ship all products within 1-3 business days.

Large Orders: We aim to ship all products within 2-10 business days.

Unless otherwise requested, we ship via UPS.  Please let us know if you would like expedited shipping of your Elasco Cable Guards.  Shipping will be charged to customer’s UPS account.

Theme Settings